#                    CONFIGURATION FILE FOR PSNADSEND VERSION 2.x
#                    --------------------------------------------
#
ModuleId         MOD_PSNADSEND_A	# Module id of this instance of PsnAdSend
OutRing          WAVE_RING      	# Transport ring to write waveforms to
MuxDataRing	 MUX_DATA_RING		# Used to send raw A/D data to a ring. Comment out or set to 0 if not used

# For Windows use port number
#CommPortTcpHost  3              	# Comm Port Number for Windows
#
# For Linux use port device string 
CommPortTcpHost /dev/ttyUSB0           # Comm Port String for Linux
#CommPortTcpHost /dev/ttyO4              # Comm Port String for BeagleBone Black
#
# For TCP/IP Connection to device us IP address or host string 
#CommPortTcpHost 192.168.1.24           # This is the same for Linux and Windows
#TcpPort		8011		# TCP/IP Port Number
#
TcpMode		 0			# Set to 1 for TCP/IP connection to host server
#
#
PortSpeed       38400          		# Comm Port Baud Rate
#
HeartbeatInt     15             	# Heartbeat interval in seconds
#
ConsoleDisplay   0                      # Windows Only; if 1 use console functions to redisplay status
ControlCExit     1	                # If 1 exit on sigint control-c event
RefreshTime      10	                # Auto Status Display Refresh Time, 0 = no status display
CheckStdin       1                      # Windows Only; if 1 check for user input
#
#                        ADC CONFIGURATION
ChanRate         100	            	# Sampling rate in samples/second
AdcDataSize      4                      # ADC Data trace buffer size. Can be 2 or 4 bytes
#
#                         TIMING INFORMATION
NoDataTimeout    60			# No Data Timeout in seconds
UpdateSysClock   0              	# 1 = PC time updated with AD board time
HighToLowPPS     0              	# 1 = PPS Signal direction is High to Low
NoPPSLedStatus   0			# 1 = Disable 1PPS LED blinking
LogMessages      1              	# 1 = Log messages from DLL & ADC to log file
TimeOffset       0              	# Time Reference offset in milliseconds
NoSendBadTime    0			# 1 = Only send packets with good GPS lock
#
# New for PsnAdSend 2.5 and above
SystemTimeError    60			# Send error message to StatMgr if the time difference
					# in seconds. 0 = no time test
# New for PsnAdSend 2.5 and above
PPSTimeError       10			# Send error message to StatMgr if the 1PPS error exceeds this amount
                                        # in milliseconds. 0 = no 1PPS test
# New for PsnAdSend 2.5 and above
NoLockTimeError    30			# Send error message to StatMgr if no reference lock after this amount
                                        # of minutes
# New for PsnAdSend 2.5 and above
FilterSysTimeDiff  0			# 1 = Do not log System to A/D board time difference messages	
FilterGPSMessages  0			# 1 = Do not log good GPSRef: time messages 
#
# Time Reference Types:
# PC = Use PC Time, GARMIN = Garmin GPS 16 or 18, MOT_NMEA = Motorola ONCORE NMEA, 
# MOT_BIN = Motorola ONCORE Binary, WWV = WWV (must have WWV option on the ADC board )
# or SKG = Sure Electronics SKG GPS Board
TimeRefType      GARMIN			# One of the types above
#
TimeFileName     /tmp/PsnSendTime      # use something like this for Linux
#
# Filter params for inverse (period extending) filter;
#     Ch#  Type SensorFreq SensorQ FilterFreq FilterQ
Filter 1   INV      4.5      .707      .5      .707
Filter 2   INV      4.5      .707      .5      .707
Filter 3   INV      4.5      .707      .5      .707
#
#    SCNL VALUES FOR EACH ADC CHANNEL
#
# The number of Chan directives below will set how many channels to record from the ADC Board
# Station can be 1 to 5 chars, Comp should be 3, Net should be 2 and Loc should also be 2 chars
#
#     Stat  Comp Net Loc Bits Gain FltrDly Invert Send DcOffset
#     ----- ---- --- --- ---- ---- ------- ------ ---- --------
Chan  LCGPZ  SHZ  PN  01   21   4    20      Y      Y     0
Chan  LCGPE  SHE  PN  02   21   4    20      Y      Y     0
Chan  LCGPN  SHN  PN  03   21   4    20      Y      Y     0